Scuba Equipment Services & Repair

Our repair technician has vast experience and is qualified to do repair & maintenance work on most makes and models of regulators, BCs & computers. We can service virtually all brands (with now defunct Dacor being the only exception)! With older regulators and those needing hose replacement, it may be smarter to replace than repair. In either case, we will let you know!
                            Don't void your warranty by trying to repair or replace your equipment at home

                        Annual service for air and enriched air (nitrox) use. Normal turn around time is one week, for express service add 25%


Service for air use only

Regulator per stage                 $30*
Pressure gauge                       $10*
Cylinder Valves                        $20*
Power inflator service               $20*
BC clean & check for leaks      $20*
Bench test regulator                 $20*

*Labor charges only - parts are extra


Air Cylinder Service

Visual inspection VIP (required annually)
       Includes O-rings & fill                            $25
Hydro test (required every 5 years)
       Includes VIP, O-rings & fill                     $50
Internal cleaning (tumbling)            starts at $25
Cylinder Valve Service                                 $25


Nitrox cylinder service

Annual visual inspection VIP
   Includes labor, O-rings & fill                      $35
02 Cleaning                                       $40
Internal cleaning (tumbling)            starts at $25
Nitrox tank wrap sticker                                 $8




Air Tank Fill

80 cubic ft tank   $7
100 cubic ft tank   $8
120 cubic ft tank  $9


Nitrox Tank Fill

32% fills
80 cubic ft tank    $12
100 cubic ft tank   $14
120 cubic ft tank   $16

36% fills
80 cubic ft tank    $14
100 cubic ft tank    $16
120 cubic ft tank    $18


Search & Salvage

Did you drop your glasses, wallet, watch or jewelry into the canal off the dock? Don’t reach for that long handled pool skimmer! You’re likely to bury your loss in muck. Pick up the phone and call us! We have the equipment and experience to locate and retrieve your lost item.
Cost: $100 per hour (2 hour minimum)



Frequently Asked Questions
Q: "How often do I need to have my regulator serviced?"
A: The rule of thumb is to have 1st and 2nd stage regulators (including octo) serviced every 1 or 2 years, dependent on how often it is used. Though the safest practice is to check with the manufacturer and follow their recommendations.

Q: "I have my own tank. How do I care for it?"
A: Rinse your tank's valve after it's been in salt water. Salt water drastically shortens the lifespan of all scuba gear, and tank valves are no exception. After rinsing, crack the valve open for a second to expel any water that might be left. Don't drain your tank completely - be sure to leave some air in it so the remaining pressure helps keep foreign objects from getting inside.
Visual inspections are required annually. Hydrostatic testing must be done every 5 years. General turnaround for visual inspections is 2 days and hydrostatic tests typically can be done in a week. Express service is available.

Q: "I was given/found some old scuba equipment. Is it ok to dive with?"
A: HAVE IT PROFESSIONALLY INSPECTED FIRST! There are many "deals" on scuba equipment you can find online, at garage sales and in the newspaper. Don't blindly trust the person selling it - there are many parts that must be serviced and/or replaced regularly. The seller might mean well, but this equipment will be responsible for keeping you alive underwater.
Be 100% sure that it is working properly before you trust it with your life!   

Contact Us

Address:
1141 Bald Eagle Dr.
Marco Island, FL 34145

Office Ph: 239-389-7889

Hours: 
Mon - Fri 9:00 am to 5:30 pm
Sat 10:00 am to 4:00 pm
Sundays by appointment


Email Address:
 scubamarco@gmail.com